Temporarily on back order, shipping will resume 12/22/24
The long awaited pistol from Ju4t3nc4s3 is finally here and ready for builders. Its hardware kits are now available for immediate shipment.
This listing is for the NAG22 parts kit. Print-a-22 has worked directly with its designer to bring this kit to the public. Exact parts list subject to change, but this kit should be everything you need short of plastic.
Complete list of hardware included below(Subject to change):
| Name | Count | Exact Part |
| Magazine Spring | 1 | .7mm WG, 12mm OD, 100mm spring |
| Hammer Spring | 2 | 8mm x 60mm Die Spring
(Light Load) |
| Hammer insert | 1 | Cut from Firepin 4mm from end |
| Trigger Spring | 1 | 5mm x .8mm x 22mm |
| Grub Screw | 1 | M3 x 10mm Grub Screw |
| Flat Head Cap Screw | 1 | M3 x 12mm |
| Fire Pin Spring | 1 | .4mm x 4mm x 10mm spring |
| Firing Pin | 1 | SL2.5 ΒΌ Hex Shank 75mm long |
| Firing Pin Retainer | 1 | M3 x 5mm Standoff |
| Firing Pin Retainer Lock | 1 | M3 x 3mm Grub |
| Internal Trigger Spring | 1 | 2mm od spring |
| Barrel | 1 | 85mm Chambered Barrel Liner (100mm for threaded) |
| Guide Rod | 1 | 3mm x 65mm 304 Stainless Rod |
| Guide Rod Spring/Recoil Spring | 1 | .8mm WG, 8mm OD, 70mm Length |
| Bolt Weight | 1 | 50g Tungsten Powder |
| Disconnector Spring | 1 | 8mm x .8mm wg x 10mm spring |
| Weight | 0.27 lbs |
|---|---|
| Dimensions | 4 × 4 × 2 in |
| Barrel | Standard, Threaded |
$79.99 – $94.99
The top source for 3D printable 22’s and Parts Kits. Bringing you all the best build guides, download links and information to help you complete your build.
Ml (verified owner) –
Very good! But read the included pamphlet… and re-download files if you have the original release files…
Some criticism: the bag of tungsten had a little hole, so everything was tungsten covered. But there was plenty for a dry pack in the slide. I would love to see you use a generic return address like shipping hub/center, just for anonymity.
Also, stickers that don’t leave residue on your parts are a little thing, but they make a big difference imo. But very pleased overall! Thanks!
Admin –
I appreciate the feedback. I’ve got some ideas on how I can package the tungsten better to prevent exactly this from happening on the future.
I’ve tried other labels but they didn’t stick well to the bags. A quick wipe with alcohol should remove any residue.