Description

The Harlot is the most popular 3d printed handgun around, and this kit includes all the hardware you will need to build one, just add plastic! Now all harlot kit ship in the pictured printed case.

The barrel liner is chambered for 22 lr.

Hand cut from RedMan’s barrel liners, and chambered with a R6M5 22lr chamber reamer. Lightly chamfered inside and out on both ends. I’m not a machine shop, just a guy cutting these by hand in my garage so length will be +/-1mm. Additionally, and as per the nature of these liners, some light finishing work may be required.

When chambered, the rim of the round will sit on top of the sleeve, not flush inside.

SPECS: 4140 steel. .223″ (5.6mm) groove diameter for .22 Long Rifle, 1-16 twist. Outside Diameter of 5/16”

Parts kit will include the following:

1: 37mm cut and chambered 22lr barrel liner

9: M3x20 Bolts (1 extra)

8: M3 Nuts (1 extra)

1: Pre-drilled breach dime

1: 10mm OD x 1mm Wire x 50mm long spring

The above parts kit is intended for the Harlot and its variants. While barrels may fit other models, the parts kits offered here are exclusively for Harlots and their variants.

Plastic and filament not included. STL’s not included. You must download and print all associated parts for the build you are trying to complete.
Print-a-22 is not the creator, developer, or publisher of these files, and does not claim any responsibility for the legality or safety of these designs.

IMPORTANT: This kit does not contain a firearm, frame, or receiver. None of the components included in this hardware kit can be assembled into a firearm without additional (3D printed) parts that you must supply. However, by purchasing this kit, it is understood that you intend to use it to manufacture a firearm. Print-a-22 is not the manufacturer of the resulting firearm; you (and/or your designated FFL) assume that role. Due to the ever-evolving laws regarding home-built, 3D-printed firearms, commonly referred to as “ghost guns,” we cannot guarantee the legality of completing or possessing this kit in your jurisdiction. By purchasing this kit, you acknowledge your intent and ability to comply with all applicable local, state, and federal laws. You also accept full responsibility for the legality and safety of the firearm once assembled, as well as for the assembly process itself. Always prioritize safety by wearing appropriate protective gear (eye and ear protection, gloves, face shields, long sleeves) when building and operating firearms, particularly those with 3D printed components. If you lack confidence or skills, consider seeking assistance from a qualified gunsmith (FFL). While we strive to offer a user-friendly kit, remember that you and/or your gunsmith are ultimately responsible for the manufacturing process.

DISCLAIMER: Usage or misuse of this product may lead to injury, exposure to chemicals known to cause cancer, and even death. This item is sold with no warranties or guarantees, either express or implied. By purchasing this product, you agree to hold the seller harmless for any consequences resulting from its use. You assume all legal liability for ownership, possession, and usage, and agree to indemnify the seller accordingly. It is your responsibility to understand and adhere to the laws in your jurisdiction.

California imposes additional requirements that cannot be met by this kit. These include mandates such as 3D printed firearms being manufactured by a California Department of Justice (CA/DOJ) licensed Federal Firearms Licensee (FFL) with a serial number provided by the CA DOJ. Moreover, all new designs must incorporate microstamping capability and undergo independent safety testing to be listed on the Unsafe Handgun Act verified safe list.

The single-shot exemption does not apply to this firearm due to its barrel length being less than 6 inches. Only purchase this kit in California if you possess the intention and ability to adhere to these regulations.

This item only ships within the US. International orders and shipping addresses outside of the US will be ignored.