Private Eye

HulkHoganHH & Richard Nixon

Six Shooter Glory

An original design brought to you by HulkHoganHH and Richard Nixon. The private eye is a classic single action revolver chambered in .22LR.

THIS IS AN ADVANCED BUILD. MORE PRECISION IS REQUIRED THAN MOST OTHER BUILDS. PLEASE USE AN ABUNDANCE OF CAUTION IF YOU ATTEMPT TO COMPLETE THIS BUILD.

This build is in public beta, so know that support is limited, and the readme is on the light side.

NOTE: The actual part files are hidden. You must enable ‘view hidden files’ to see the STL/Step files once downloaded

Item	Included
M3x20 screws (1 needs to be sharpened for a firing pin)	16
M3x22 screws (for trigger and hammer)	2
M3 locking nuts (for trigger and hammer screws)	2
M3x8 screw (trim to ~7mm in length)	1
M3 nuts	17
4mm x 40mm Stainless Dowel pin	1
1.500″ sections of barrel liner	6
2.5″ section of barrel liner	1
Alignment/Locking Arm Spring 0.625″ Long, 0.240″ OD, 0.204″ ID	1
Trigger Spring 0.440″ Long, 0.180″ OD, 0.152″ ID	1
Hammer Spring 12″ Long, 0.328″ OD (must cut to ~1.75″ length)	1
Index Arm Spring 90 Degree, 0.235″ OD	1

Private Eye / Dirty Harry Hardware Kit
Rated 5.00 out of 5
$109.99 – $124.99 Select options This product has multiple variants. The options may be chosen on the product page

Coming soon…

Richard-Nixon’s chime: $Richard-M-Nixon

HulkHoganHH Bitcoin: 1QDhKAKmqqbakd6xPkcH5XuwqV3b1wqgro Monero

HulkHoganHH Monero:

(xmr): 4AXfDNfKXrPPH8PG7932jjREiP82BAQ2BFCtevfVZJ9Bev1R7wwnbz3EudxQh6RusNQPtMeeJ6FY3MQpJB6h8FVADtGDHWy

HulkHoganHH & Richard Nixon

Private Eye

Parts List

Parts Kits

Private Eye / Dirty Harry Hardware Kit

Support the Creators

Print-a-22 - 3d Printable 22LR Parts Kits and Builds

Shop

Builds

About

Social