Kaewon’s Wisp is one of the first fully printable bolt action rifles to be released to the public.
All hardware for this kit has been ordered, but shipping delays from Hurricane Milton means its not yet in hand. I expect to be shipping this kit before the end of October.
BYOB will be the most common option for this kit, leaving you the option to source an RS22 barrel, or to use a liner. The files in this build are set that you can use whatever length liner you’d like, you just need to print the barrel to match. The recommended way to build this is to use the BYOB kit, and order whichever length barrel liner you’d like to build it with separately.
Complete parts list below:
Laser Cut Parts: Extractor, ejector, bolt face, bolt reinforced rim, and breach face
| Name | Count | Exact Part |
| Ejector | 1 | M3 x 8mm |
| Handguard, Mag | 5 | M3 x 12mm |
| Firing Pin | 1 | M3 x 55mm |
| Firing Pin Nut | 1 | M3 Nut |
| Bolt | 1 | M4 x 12mm |
| Stock Button | 1 | M4 x 20mm |
| Brace Hook | 1 | M4 x 30mm |
| Hinge | 2 | M4 x 35mm |
| Stock Mount | 1 | M5 x 30mm |
| Stock, Brace | 3 | M4 Nut |
| Stock Mount | 1 | M5 Nut |
| Grip Heat Insert | 1 | M4 x 6 x 6mm heat insert |
| Grip Screw | 1 | M5 x 20MM |
| Grip Screw heat insert | 1 | M5 heat insert |
| Magazine Spring | 1 | print-a-22 mag springs |
| Stock/Brace spring | 1 | 626 Spring |
| Fire pin and ejector spring | 2 | |
| RS22 Retainer Pin | 2 | |
|
Barrel Liner or RS22
|
Please note: The wisp is a public alpha release. Please use caution while operating. This kit does NOT include an AR FCG, which will also be needed to complete the build.
| Weight | 0.15 lbs |
|---|---|
| Dimensions | 4 × 4 × 2 in |
| Barrel | BYOB, RS22, Liner (pistol) |
$54.99 – $124.99
The top source for 3D printable 22’s and Parts Kits. Bringing you all the best build guides, download links and information to help you complete your build.
Reviews
There are no reviews yet.