Description
Pre-orders are beginning for the Wise Guy. If you’ve ever wanted a Tommy gun, this build is for you.
We should be able to start shipping this kit in September if there is any pre-order interest.
Complete parts list is below: You will still need an AR FCG to complete this build.
| Name | Item | Quantity Needed |
| FCG Pins | M4 x 25mm Pin | 2 |
| Bolt Guide Rods | 1/8″ Steel Rod, 8.375″ long | 2 |
| Bolt Weights | 1/2″ x 3″ Steel OR | 1 |
| or Tungsten | 1 | |
| Barrel Liner | 11″ OR | |
| 16″ | ||
| Firing Pin | M3 x 65mm threaded rod | 1 |
| Rear Site mount, firing pin | M3 Nut | 5 |
| Rear site mount, ejector, feed ramp | M3 x 10 Bolt | 7 |
| Front Grip | M3 x 20 Bolt | 2 |
| Fire pin retainer, front sight post | M2 x 10mm screw | 2 |
| Front takedown pin | M3 x 30 Bolt | 1 |
| Front Takedown locknut | M3 Locknut | 1 |
| Barrel, Charging Handle | M4 x 25mm bolt | 3 |
| mag catch | M4 x 40mm threaded rod | 1 |
| barrel retention, mag catch | M4 Locknut | 4 |
| Charging Handle | M4 Nut | 1 |
| Grip and rear takedown | M6 x 25mm | 2 |
| Rear takedown | M6 Nut | 1 |
| Recoil Spring | https://www.mcmaster.com/9637K64 | 2 |
| Firing Pin Spring | https://www.mcmaster.com/9657K268 | 1 |
| Mag Catch Spring | ||
| magazine spring | 626 Compression Spring | |
| Stock Parts | Included in Long configuration | |
| Mount to receiver | M4 x 20 | 2 |
| Buttpad | M3 x 25 Flat Head | 2 |
| Stock Alignment Rods | M3 x 120mm Threaded Rod | 2 |
Reviews
There are no reviews yet.